GT13E2 Spare Parts We Manufacture
ZURN Power covers the full GT13E2 parts scope for ABB, Alstom and GE 13E2 series heavy-duty gas turbines. Each component family below is produced in-house on OEM drawings, with material selection and dimensional inspection matched to OEM specifications.
- Burners — EV and AEV burners for the 72-burner annular combustion chamber, machined from heat-resistant alloys. GT13E2 EV/AEV burner parts.
- Turbine Vanes — Nozzle segments and vane rows cast and machined for hot gas path service. GT13E2 turbine vanes & nozzle segments.
- Turbine Blades — Row 1–4 rotor blades in Inconel 738-class superalloys with optional TBC coating. GT13E2 turbine blades.
- Compressor Parts — Dynamic and stator blades for all 21 compressor stages. GT13E2 compressor blades & stator parts.
- Rotor Components — Welded rotor parts, spacers and coupling hardware manufactured to drawing. GT13E2 rotor components.
GT13E2 Hot Gas Path Components
The GT13E2 hot gas path is where maintenance cost concentrates: turbine blades, nozzle segments and shroud rings all operate above 900°C. ZURN Power manufactures these gt13e2 components from Inconel 738 and equivalent nickel-base superalloys, with thermal barrier coating (TBC) applied on request to extend component life in peaking and base-load duty. Precision castings are finished by 5-axis machining and verified with full dimensional reports, so replacement parts install without rework and keep your inspection interval on schedule.
GT13E2 Combustion System Parts
The GT13E2 combustion chamber is annular, fitted with 72 EV/AEV burners arranged around the circumference — a design that gives low NOx performance but makes burner condition critical to emissions and flame stability. We supply gt13e2 burner parts including complete EV and AEV burners, fuel nozzles, combustion liners, transition pieces and flame tubes, all manufactured to OEM drawings with material traceability and EN 10204 3.1 certification as standard.
GT13E2 Compressor & Rotor Parts
The 21-stage axial compressor drives GT13E2 performance and efficiency, while the welded rotor holds the whole line together. ZURN Power manufactures gt13e2 compressor parts — rotor blades, stator vanes, diaphragms and seal strips — plus welded rotor components and spacers produced strictly to OEM drawings. Blades are batch-inspected for profile, root fit and balance, supporting full rotor overhauls as well as single-stage replacements.
GT13E2 Part Numbers We Supply
| Part Number | Component | Position |
|---|---|---|
| HTCT155658P0001 | Turbine Vane | Row 1 nozzle segment |
| HTCT155750R0002 | Turbine Blade | Row 2 rotor blade |
| HTCT124748R0115 | AEV Front Segment | Annular combustion chamber, front arc |
| HTCT155331P0002 | Combustion Liner | EV/AEV burner assembly |
| HTCT155659P0001 | Turbine Vane | Row 2 nozzle segment |
| HTCT155751R0002 | Turbine Blade | Row 3 rotor blade |
| HTCT124749R0115 | AEV Rear Segment | Annular combustion chamber, rear arc |
| HTCT155332P0002 | Transition Piece | Burner-to-liner hot gas path |
Full part-number coverage on request — send your GT13E2 BOM or drawing for quotation.
Manufacturing Capability & Certification
ZURN Power (Jiangsu Roban Special Alloy Co., Ltd.) produces GT13E2 spare parts by OEM-drawing machining and reverse engineering from supplied samples. Materials include Inconel 738 and equivalent high-temperature alloys; thermal barrier coatings are applied in-house. Every shipment includes an EN 10204 3.1 material certificate and a full dimensional inspection report. Standard lead time is 8–14 weeks, with export experience across the Middle East, Southeast Asia, Europe and Russia.
GT13E2 Technical Specifications
Before ordering, confirm your unit's configuration against our GT13E2 technical specifications page — frame ratings, combustion layout and component counts. For sister frames, see our GT13E2 spare parts coverage for E-class fleets.
Frequently Asked Questions
Which GT13E2 parts does ZURN Power manufacture?
We cover the full component scope — EV/AEV burners, combustion liners, transition pieces, turbine vanes and blades, compressor blades and stator parts, and welded rotor components — all built to OEM drawings or reverse-engineered to sample.
Are your GT13E2 components certified?
Yes. Every part ships with an EN 10204 3.1 material certificate, full traceability to heat lot, and a dimensional inspection report.
What is the lead time for GT13E2 spare parts?
Standard lead time is 8–14 weeks depending on component type, coating requirements and casting complexity. Expedited review is available on request.
Do you match OEM part numbers?
Yes. We manufacture against Alstom/GE GT13E2 part-number formats and accept your BOM or drawings directly for quotation and production.
How do I get a quote?
Email your part number, drawing or BOM to hanson@zurnpower.com, or message Hanson on WhatsApp +86 186 1687 9105. Quotes for B2B projects are issued after drawing review.